Home Autos Oil Change Required Message Meaning in Jeep

Oil Change Required Message Meaning in Jeep

by Jack
3 minutes read
Oil Change Required Message Meaning in Jeep

Oil Change Required Message Meaning in Jeep. A message stating that an oil change is necessary may appear after some time if you own a Jeep. I’ll explain in the essay why the oil changer needed to send out indicators and what you should do in this circumstance.

What does it mean Oil Change is required in Jeep?

The Oil Change Required alert system will notify you when it is time to change the oil based on the vehicle’s mileage and other influencing factors. However, the indicator is incompatible with all oil quality sensors. Completely software-based.

When the next oil change interval has been signalled, the “Oil Change Required” message will appear on the EVIC display for approximately ten seconds. Due to the duty cycle-based nature of the indicator system, the oil change interval may vary depending on your driving manner.

Oil change required jeep

How to adjust the engine oil Change light required in Jeep?

The required oil change indicator will remain lit until deactivated. The following are the steps to recalibrate the light:

  1. First, you must switch off your vehicle. Then, place the key in the ignition and activate the “ON/Run” mode without starting the engine.
  2. Within ten seconds, depress the accelerator pedal three times in succession.
  3. Involves turning the ignition switch to the lock position and then back to the ON position to determine if it has been reset.

If it does not reset, repeat the preceding instructions two or three times.

For instrument cluster display:

  1. Turn the ignition off. Then, without starting the engine, turn the ignition key to the On position.
  2. Using the steering wheel arrows, alter the selection to “Vehicle Info.”
  3. Locate and select the “Oil Life” option.
  4. The fourth step is to click and hold the OK button until it resets.

What is the maximum time between oil changes for Jeeps?

It is not recommended to drive for more than twelve months or 10,000 miles. Therefore, you can travel up to 10,000 miles without changing your oil. In excess of that, you will result in an expensive engine repair.

How frequently must oil be changed in Jeeps?

Regarding oil changes, there are no hard and fast regulations. Moreover, it will differ depending on the Jeep variant. However, you should change the oil every 7,500 to 10,000 miles if you follow the standard maintenance schedule.

If you are driving in extreme road conditions, such as off-roading, commercial use, heavy transport, or racing, you should complete the task sooner than the suggested time. Therefore, following the Jeep owner’s manual is always the best option.

How do you recognise when your Jeep needs an oil change?

When the oil change indicator alerts you to change the oil and filter, it is time to change the engine oil in your Jeep. Here are a few common indications that the engine oil should be changed:

  • The “Oil Change Required” signal will appear.
  • The engine emits an odd sound.
  • The exhaust emits smoke.
  • A dark and grainy oil.

In conclusion

The Oil Change Required Jeep indicator is a useful feature that alerts the driver when it is time to change the engine oil. I trust this article helps you understand this feature and how to reset the indicator.

Also Read: How to Unlock Steering Wheel without Key?

You may also like

Leave a Comment